E-Bench KH 2257, Руководство по эксплуатации

Страница: 46 / 52

 | Operating Instructions
The MP3-CD player will then be supplied with power from the
car’s electrical system.
4 Insert
the
car cassette adapter
into the
cassette deck
of
the
car’s radio
in such a manner that the side with the connect-
ing cable is pointing towards you.
5 Insert
the
plug of the connecting cable
into the
“PHONES”
headphones socket
of the MP3-CD player.
6
Set
“OFF”
with the
“CHARGE” slide
underneath the MP3-CD
player.
7 Open the CD compartment , insert an audio CD or MP3-CD,
and then close the CD compartment.
8 Switch on the car radio and set the volume to a minimum
level .
9 Switch on the MP3-CD player and set the volume at a
middle level .
10 Start playback of the loaded CD/MP3-CD.
11 Set the required playback volume on the car radio and
PM3-CD player .
13.3.4. After use
After use remove the car cassette adapter from the cassette
deck of the car radio and disconnect the connecting cable from
the “PHONES” headphones socket of the MP3-CD player.
Manual_EN 18.09.2002, 0:02 Uhr 44