Auto purify mode
Set your Dyson purifying humidifying fan to Auto purify mode and the on-
board sensors will intelligently adjust the settings of your machine according
to the air quality.
Air quality: your machine will pause when the target air quality has been
reached, switching on again when the air quality levels drop.
Airflow speed: the airflow speed will increase until the target air quality and
temperature have been reached.
Night mode: your machine will only run with airflow speeds from 1 to 4.
Auto humidify mode
Set your Dyson purifying humidifying fan to Auto humidify mode and the on-
board sensors will intelligently adjust the settings of the machine according to
the temperature and humidity of your room.
Room humidity: your machine will pause when the target room humidity has
been reached, switching on again when the room humidity levels drop.
Airflow speed: the airflow speed will increase until the target humidity level
has been reached.
To turn off Auto humidify mode or to change the humidity levels manually,
press the Humidity control button.
Oscillation
Press the Oscillation button and select the angle of oscillation to
0°, 45°, 90° or Breeze mode.
Pause the oscillation at any point by pressing the Oscillation button.
Press the Oscillation button again to resume.
To reset the Oscillation direction to the center, press and hold the
Oscillation button for two seconds.
The remote control with
the Auto purify button
on the left hand side,
below the Standby
button.
The remote control
with the Auto humidify
button on the right
hand side, below the
Information button.
The remote control with
the oscillation button
on the left above the
sleep timer.
