Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Your machine comes with a HEPA+Carbon filter. If you
purchased the Dyson Purifier HCool Formaldehyde™
your machine also comes with a permanent catalytic filter.
Push the HEPA+Carbon filter into the outer cover and position
on the base. Push firmly until both outer covers click into place.
SCO
NON-SCO
SCO
NON-SCO
Scaled 81% for QSG to maintain minimum line weight
Original scale
clik
clik
clik
clik
clik
clik
MAX
clik
clik
clik
clik
clik
clik
MAX
Place the remote control on top of the machine with the buttons
facing down.
Plug in and switch on.
The purifying humidifying fan with the filter covers open showing a HEPA plus
carbon filter located in the filter covers and a catalytic filter. Arrows demonstrate
that the catalytic filter is fitted directly to the base of the machine and the filter
covers will need to be assembled onto the base of the machine.
