Changing your HEPA+Carbon filter
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
SCO
NON-SCO
SCO
NON-SCO
Scaled 81% for QSG to maintain minimum line weight
Original scale
clik
clik
clik
clik
clik
clik
MAX
clik
clik
clik
clik
clik
clik
MAX
Supplied with a HEPA+Carbon filter.
To change your HEPA+Carbon filter, push down on the buttons either side
of your machine to release the outer cover. Push down on the tabs to remove
the filter.
Push the replacement filter into the outer cover and make sure the tabs click
into place.
Put the outer covers into position on your machine and push firmly until they
both click securely into position.
Plug in and switch your machine, and reset your filter life.
Resetting your filter life
5, 4, 3, 2, 1...
It’s important to reset your filter life after you have replaced your filter.
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five, ending with
default screen.
The filter life has been reset and your machine is ready to use.
The purifying humidifying fan with the filter covers open
showing a HEPA plus carbon filter located in the filter covers
and a catalytic filter. Arrows demonstrate that the catalytic filter
is fitted directly to the base of the machine and the filter covers
will need to be assembled onto the base of the machine.
