DYSIS Ultra 2.0 Digital Colposcope Instructions for Use
0230-53095, Rev 05
Revision Date 05-Mar-2021
Page
74
of
79
c.
HL7 (adding appointments & patient demographics retrieval)
To add appointments to DYSIS Ultra 2.0 Digital Colposcope the following settings should be applied:
to receive an HL7 channel “Add appointment” and then add it to
Mirth, Accessible at DYSIS Ultra 2.0 Digital Colposcope IP Address
(IP shown at Connectivity
tab, under network IP)
On the Settings: tab EMR, Enable New Appointments
When aforementioned channel is added and deployed, then through on the patient database, a new button
named
Todays appointments will appear. By pressing it, only the today’s appointment will be listed. In order
to switch betw
een the entire patient database and today’s appointment list, you select the relative button.
To query for a patient ID, the following settings should be applied:
Send an enquiry at
to receive two HL7 channels “Query” and “Response” and then
add them to Mirth, Accessible at DYSIS IP Address
(IP shown at Connectivity tab, under
network IP)
On the Settings: tab EMR, Enable Query
When the aforementioned settings have been applied, On Patient Database Page a new Query button is now
available.
By pressing it, a popup window appears. Enter the required Patient ID and click Query to retrieve patient
demographics.