
DYSIS Ultra 2.0 Digital Colposcope Instructions for Use
0230-53095, Rev 05
Revision Date 05-Mar-2021
Page
68
of
79
a.
Adding a printer
Prior adding a printer, please use the following link to check that the printer to be installed is compatible with
the DYSIS Ultra 2.0 Digital Colposcope.
http://www.openprinting.org/printers/
If compatible, then proceed with the following steps or follow the instructions found on the above link.
Press the Add new printer button. By pressing this button, the following popup window is displayed.
As described at the popup message, visit the displayed webpage. The user will have access to the printer
configuration webpage (see below); a username & password will be requested (username: printer, password:
printer)