Manual for HDV-1
Starting
~Push-up power button, access Mode PAL; Push-down power button, starting and entering Mode NTSC; Middle means power off.
~Starting will straightly access default mode or last power-off mode. Press mode button
“M” to choose mode, press “video button” to confrim current
mode. Press vedion button
“O” to start recording or photographing, press again “video button” to stop it.
~When recording/ photograph, 3 indicator lights works means same mode.
~When starting, 3 indicator lights will flash quickly at the same time, then all lights switch off, and standby.
~Recording, when U1, U2, U3 records, indicator light will flash slowly every two seconds.
~Photographing, when P1 photographs, indicator single flash 1 times, display screen
［
］
flash 1 time. Light P2 will quick flash 3 times, display
screen
［
］
will quick flash 3 times.
~Interval recodeing, when T1, T2, T3 records, indicator light will slow flash 2-second interval, display screen rotates.
~Lens default 180
°
positive direction, long press
“video button” for 3 seconds, after overturn 180
°
, all words inverted display.
~Electric quantity indicate, full energy FU, 99, 66, 33, CH low voltage, when low voltage, 3 indicator lights will be long on and quick flash, display
screen shows CH.
~The longest recording time is 15mins.
Connection with computer
~Connect HDV-1 with computer by USB, when host is already On, LCD display will show
, then it can read data from computer, It will be Off after
pull out the USB. When host is Off, it just entering the power off and charging status. Turn on at the moment, it will enter the mode PC connects with
computer.
~When USB connect with external power supply, host will keep on the current status, it can be turned on and turned off freedom.
Charge
~Every time connect HDV-1 and computer, it will charge the host directly.
