MAINTENANCE AND CLEANING
•
Warning! When cleaning, never immerse the device in water or spray it with water!
•
Clean the outside cover of the device with a damp, soft, lint-free cloth and then wipe the cleaned surfaces
with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the device dry completely
before re-using or storing it.
•
To disinfect the sensor of the clinical digital thermometer, use a small piece of cotton-wool slightly immersed
in ethyl alcohol. Take care that alcohol does not come into contact with the plastic cover.
•
Never use solvents (acetone, benzene, petrol etc.) to clean the device because these materials could dissolve
the plastic cover and damage the internal components. Do not use harsh or abrasive cleaning agents.
•
Before using the device again or putting it into storage, dry it out completely.
Storage of the clinical digital thermometer
•
Please keep the device in its box when it is not in use, this way you can protect it against possible damage
during storage.
•
If you do not use the device for a longer period of time (more than 1 month) then please remove the batteries
from the battery holder. If you do not do this, corrosive chemicals may escape from the batteries and damage
the device.
QUALITY CERTIFICATION
We certify hereby that the Clinical Digital Thermometer Model dyras FET-365 fulfils the technical criteria listed below
Model: FET-365
Description:
Clinical Digital Thermometer
Nominal voltage:
DC 1.5 V, from one small sized battery
model LR/SR41 or 392A
Battery life in continuous measurement operation:
about 200 hours
Energy consumption during measurement:
0.15 mW
Energy consumption when switched off:
negligible
Service temperature range:
+10 °C to +35 °C
Storage temperature range:
+5 °C to +40 °C
Measuring limits:
+32 °C to 42.9 °C
Sensitivity: 0.1
°C
Accuracy:
+/- 0.1 °C
Weight:
approx. 11 g
Overall dimensions together with holder:
133 mm x 22 mm x 14 mm
FET-365
8
Manufacturer:
Hangzhou Sejoy Electronics & Instruments Co. Ltd. Building 2,
No.202, Zhenzhong Road, West Lake Economy & Technology Zone,
Hangzhou, China
Model number of manufacturer:
MT-101
Authorised representative in the EU: Shanghai International Trading Corp. GmbH (Hamburg)
Eiffestrasse 80, 20537 Hamburg, Germany
Importer:
dyras wwe.trading Kft. 1108 Budapest, Gyömrői Rd. 140. Hungary
Owner of trade mark:
The dyras wwe.factory LLC 444 Brickel Avenue / Suite 51103
Miami, FL 33131 USA
We are continuously developing our products to keep them up-to-date, which means the technical data of our devices may change without
any prior notice. Errors and omissions excepted.
COPYRIGHT
© Copyright The dyras wwe.factory LLC, U.S.A.
All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract
reprint and other duplication - are specifically reserved. Any breach may result in criminal action.
THE CE SYMBOL
This device meets the requirements for safety and electromagnetic compatibility (EMS). The relevant ‘CE’ mark can
be found on the nameplate, on the packing box and in the instruction manual.
Dear Customer,
You are kindly requested to visit the dyras home page in the Internet from time to time, where you can be
informed about actual news concerning your product, get acquainted with our new devices or be informed about
our promotions.
You are requested to visit our home page
www.dyras.com
, where you can be informed about any current
information that may concern your device.
EN
FET-365
9
User'sManual FET-365_A5:User's Manual for FET-365 2010.05.03. 16:37 Page 8