EN
DYON SMART 42 AD
20
Insert Batteries into the Remote Control
1. Take a coin to remove the battery cover. Insert
the coin into the latch and press down the coin
with a little pressure, until the battery cover
released from the latch. Remove the battery
cover. Inserting the two AAA 1.5V batteries,
make sure that the polarity (+ or -) of the
batteries matches with the polarity inside the
unit.
2. Replace the battery cover by first inserting the
battery cover at the upper end and then pressing it
at the bottom.
Replace the batteries when the TV set begins to
show the following symtomps:
•
The signal is hesistant or irregular.
•
The remote control does not work
Note
•
Alkaline Batteries are recommended.
•
Remove the batteries when they are
exhausted or if the remote control is not be
used for a long time.
