V1.1.0
DYON LIVE 32 PRO
– Quick Start Guide
1. Mounting
Please pay attention to the instructions of the stand mounting
provided in the manual.
2. Switch ON
Step 1: Connect the TV with the power supply.
Step 2: Please establish the connection for the antenna to the
desired mode of reception.
The antenna connection for Satellite,
DVB-C
and
DVB-T2
you will find on the backside, face to the left if viewed from
the front.
Note on DVB-T2
Whether and how many transmitters can be received depends on the location of
the device and the availability of DVB-T2 transmitters in this region. DVB-T2 radio
stations are only available in very few regions.
Please note that when using DVB-T2, a new station search should be performed
every time you change location.
Broadcast stations and their transmission frequency vary from region to region.
Note on DVB-C Reception
Via DVB-C the programs can be received analogue or digital. If possible you
should prefer the digital reception mode. In this mode there are available more
channels with a better picture quality.
Encrypted Channels
Via satellite, DVB-T2 or DVB-C you can receive also encrypted TV channels.
Therefore, you need a CAM Module and a Smart card of your service provider.
Which programs are usable depends on the contract.
Step 3: If desired, you can insert a CAM Module and a Smart card
of your service provider into the CI+ Slot.
Note
Module and Smart card are not included in the delivery.
The activation of the card can take a few minutes when it will be used for the first
time. The device controls the module after every switching on. Please pay
attention to the manual of CI+ Module and Smart card.
Just CI+ Modules and Cards are usable. Other models are not supported.
Note on CI+
Please pay attention that function can be limited on some channels.
The program provider limits this. The manufacturer is not responsible for this.
3. Switch ON
Step 1: Insert the batteries making sure the polarity into the remote
control.
Step 2:
To switch on press the red “power button” on the top left on
your remote control.
Step 3: The device will start and the initial setup will be shown.
3a. Switching ON at the device
Seen from the front, the on/off switch on the unit is located to the left
of the centre next to the status light at the bottom.
(See illustration above)
•
When switched off
o
Press the button to turn on the unit
•
When switched on
o
Press the button to display the function menu.
3b. Funtion Menu
•
Press key briefly:
To select the desired function.
•
Press and hold:
To execute the selected
function.
Key functions
Key functions in the setup
menu and when selecting the
signal source:
On / Off
Open the settings menu
Selecting the signal source
Confirm selection
(OK)
/
Increase / decrease volume
/
-key /
- key
/
Previous / Next Channel
/
-key /
-key
4. Setup
Step 1: Please select the desired language of the menu with
the
/
button and confirm with OK button. Press the
button to proceed to the next setting.
Step 2: Select the country where you are located.
Step 3: Select
“on” for usage at home.
Step 4: Press the OK button and select the mode of reception.
Step 5: With the help of
/
button, select if analogue (ATV), #
Digital (DTV) or both type of programs should searched.
The LCN setting will be set automatically. If DVB-S was
selected as reception mode, please press the EXIT button
to use the preinstalled channel list.
Step 6: Wait until channel search is finished and the first channel
will be displayed.
Important Remote Control keys
Note
For detailed Information about operating and about the device please read the
enclosed manual carefully.
If you have any further questions please refer to our customer service
In order to handle your issue quickly we kindly ask you to provide us with the
following information:
- Name of DYON - Product
- Serial number and date of purchase
- Description of problem
Mute
Change the aspect rate
(ASPECT)
Signal source selection (e.g.
Satellite, DVB-T/-C, Scart,
HDMI, USB) (Source)
Arrow keys for navigation
Exit the menu (Exit)
Adjust the volume
(VOL +/-)
Program guide (EPG)
On / Off (Power)
Numeric keys for direct
program selection
Channel list (List)
Confirm selection (OK)
settings menu
Next Channel/
Previous Channel
Playback control in
USB mode
Teletext (TEXT)
DVB-T / -C
Satellit
On / Off Switch
