3
2004-2011 Dyna Models
Diagnostic connector is located behind the Left hand
side cover. Connector is Light Grey in color with black
rubber plug installed.
2007-2013 Sportster Models
(including XR Models)
Diagnostic connector is located behind the Left hand
side cover. Connector is Light Grey in color with black
rubber plug installed.
2008-2013 Touring Models
Diagnostic connector is located behind the left hand
side cover. Connector is Light Grey in color with a black
rubber plug installed.
2001-2010 Softail Models
Diagnostic connector is located under the seat, attached
to the frame by the rear fender. Connector is Light Grey
in color, with black rubber plug installed.
2002-2007 Touring Models
Diagnostic connector is located behind the right hand
side cover. Connector is Light Grey in color with a black
rubber plug installed.
Note:
Requires removing the right side saddle bag.
2002-2017 V-Rod Models
Diagnostic connector is located behind the Right Front
frame cover. Connector is Light Grey in color with a black
rubber plug installed.
Note:
Tools required to access.
DIAGNOSTIC PORT LOCATION
INSTALLING THE POWER VISION CONTINUED
2
Route the Power Vision cable away from any moving or
hot parts. Dynojet recommends using zip ties to secure
the cable to existing non-moving components.
3
Secure the Power Vision to the vehicle using the supplied
Velcro or mounting hardware. Make sure the Power Vision
will not interfere with the operation of the vehicle.
Visit
www.dynojet.com
for an array of mounting solutions
for your Power Vision.
Note: The Power Vision does not need to be mounted
to the vehicle, however, the Power Vision provides
a window into your vehicle. Mount the Power Vision
to your handlebars and gain access to customizable
full-color gauge screens, along with data logging and
troubleshooting screens.
ROUTING THE CABLE