I16-035EX
www.powercommander.com
02-08 Honda VTX1800 PCV EX - 3
1
Remove the seat.
2
Remove the airbox assembly.
3
Remove the fuel tank.
4
Remove the left side cover.
5
Using the supplied Velcro, secure the PCV EX module behind the left side
cover at the location shown in Figure A.
Clean both surfaces with the supplied alcohol swab prior to applying the
Velcro.
6
Route the PCV EX wiring harness towards the right hand side of the bike,
through the frame, under the fuel tank, and towards the throttle bodies while
following the stock wiring harness on the right hand side of the frame as
closely as possible (Fig. B).
Make sure the wiring harness is free and clear of any hot or moving parts and
that none of the wires will get cut or pinched when the fuel tank is reinstalled.
We recommend routing the wiring harness behind the rear coil.
7
Locate and unplug the stock wiring harness from the bike’s fuel injectors
(Fig. C).
FIG.A
FIG.C
FIG.B
Unplug
Unplug