Dynojet Power Commander V 23-010, Инструкция по установке, Страница: 4 / 5

I23-010 www.powercommander.com 2013 Husqvarna Nuda 900 PCV - 4
7 Plug the PCV wiring harness in-line of the bike’s fuel injectors and the stock
wiring harness (Fig. D).
Plug the pair of PCV wiring harness connectors with ORANGE colored wires
in-line of the left-most cylinder (cylinder #1).
Plug the pair of PCV wiring harness connectors with YELLOW colored wires
in-line of the right-most cylinder (cylinder #2).
FIG.D
8 Locate and unplug the stock wiring harness from the bike’s throttle position
sensor (Fig. E).
The throttle position sensor is located on the right-hand side of the throttle
bodies.
FIG.E
9 Plug the PCV wiring harness in-line of the bike’s throttle position sensor and
stock wiring harness (Fig. F).
FIG.F
Unplug