Dynex 50" LED TV
13
DX-50D510NA15
www.dynexproducts.com
DVI (same as HDMI but requires an audio connection)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the
DVI OUT
jack on the cable or satellite box.
4
Connect the other end of the cable to the
HDMI1/DVI
jack on the side of your TV.
5
Connect an audio cable (not provided) to the
PC/DVI AUDIO IN
jack on the back of your TV and to the
AUDIO OUT
jacks
on the cable or satellite box.
6
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7
Press
INPUT
to open the
INPUT SOURCE
list.
8
Press or to highlight
HDMI1
, then press
ENTER
.
Notes
You must use the
HDMI1/DVI
jack to connect a cable or satellite
box using DVI. If you use another HDMI jack, you will not hear
sound from the TV speakers.
Note
When you connect the audio using the
PC/DVI AUDIO IN
jack, the
audio output is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Side of TV
HDMI cable
connector
HDMI1/DVI
jack
On your TV
Audio cable
connector
PC/DVI
AUDIO IN
jack
Audio cable
Back of TV