12
Dynex 50" LED TV
DX-50D510NA15
www.dynexproducts.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see “
HDMI (best)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an HDMI cable (not provided) to one of the
HDMI
jacks on the side of your TV and to the
HDMI
OUT
jack on the
cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press or to highlight
HDMI1
or
HDMI2
, then press
ENTER
.
Note
An HDMI cable carries both audio and video. You do not need to
use any audio cables.
HDMI cable
Cable or
satellite box
Side of TV
HDMI cable
connector
HDMI jack
On your TV