Dynex DX-24LD230A12, Руководство пользователя

Страница: 30 / 48

26
Changing channel settings DX-24LD230A12
Viewing a favorite channel
To view a favorite channel:
1
Press FAV . The Favorites channel list opens.
2
Press or to highlight a channel, then press
ENTER / to tune to the channel.
Adding or changing a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also relabel a
channel that is already labeled.
To add or change a channel label:
1
Press MENU . The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Channel . The Channel
menu opens. Press or ENTER / to access the
menu.
3
Press or to highlight Channel Labels , then
press ENTER / .
4
Press or to select the channel you want to label,
then press or ENTER / .
5
Press ENTER / again to open the on-screen
keyboard. Press , , , or to highlight a
character, then press ENTER / to add the character
to the label. Repeat this step to add more characters.
• Highlight Caps Lock , then press ENTER / to
toggle the letter case from small to capital letters.
• Highlight
,
then press ENTER / to delete a
character.
• Highlight Space , then press ENTER / to insert
a space.
6
When the label you want has been entered,
highlight
Enter , then press ENTER / to assign the
label to the channel.
7
Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to determine if
you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to
experience picture degradation.
To check the digital signal strength:
1
Press MENU . The on-screen menu opens with the
Picture menu displayed.
DX-24LD230A12.book Page 26 Friday, April 8, 2011 2:05 PM