Understanding the basics
17
DX-24LD230A12
Understanding the basics
Turning your TV/DVD combo on or off
To turn your TV/DVD combo on or off:
1
Make sure that the power cord is connected to a
power outlet.
2
Press (Power) to turn on your TV/DVD combo.
3
Press (Power) again to turn off your TV/DVD
combo. Your TV/DVD combo enters Standby mode
and the power indicator LED turns red.
Selecting the video input source
To select the video input source:
1
Turn on your TV/DVD combo, then press
INPUT
. The
INPUT SOURCE
list opens.
2
Press
INPUT
repeatedly, or press
or
to select the
video input source. Wait a few seconds for the
TV/DVD combo to switch to your selection, or press
ENTER
/
to switch immediately.
Using the DVD player
Your TV/DVD combo’s built-in DVD player plays DVDs
with the
or
playable region number marks. DVDs
with other region markings are not playable. See page 40
for a list of compatible disc formats.
To start disc playback:
1
Press
(Power) to turn on the TV/DVD combo.
2
Insert a DVD into the disc slot with the label facing
forward. The DVD player reads the DVD and displays
the opening screen.
The TV/DVD combo automatically switches to DVD
mode. The “Loading” message appears for a few
seconds.
If you loaded an audio CD, the file browser screen
appears and music playback automatically starts. If
you loaded a video CD or DVD and that disc has a
root menu, this root menu is displayed. Press
,
,
, or
to navigate the menu options. If there is no
root menu, video playback automatically starts.
Playback controls
• Press
VOL+
/
VOL–
to adjust playback volume.
• Press
(Play/Pause) to temporarily suspend disc
playback (still mode). Press it again to continue
playback.
• Playback navigation controls:
• Press
(Skip back) to play the previous title or
track.
• Press
(Fast reverse) to play in fast reverse
direction.
• Press
(Fast forward) to play in fast forward
direction.
• Press
(Skip forward) to play the next title or
track.
• Press
A-B
to create a playback loop.
• During playback, press
A-B
at the point where
you would like the playback loop to begin. This
sets an “A” point.
• Press
A-B
again when the playback reaches the
point where you would like the playback loop to
stop. The sets a “B” point. The section between
points A and B will be played repeatedly in a loop
until you press
A-B
again.
• Press
(Stop) to stop playback.
To remove the disc:
1
Press
(Eject) to unload the disc.
2
Wait for the disc to be ejected, then remove the disc
from the slot.
Warning
Keep your fingers clear of the disc slot when loading
or unloading a disc. Neglecting to do so may cause
serious personal injury.
DX-24LD230A12.book Page 17 Friday, April 8, 2011 2:05 PM
