Dynaudio Focus, Руководство пользователя

Страница: 21 / 36

Coaxial Output Connection
The Focus Primary speaker is fitted with a coaxial digital output that can be used to enable an alternative wired
connection to the Client speaker.
A wired connection between the speakers offers digital audio resolution up to 196 kHz / 24 Bit. You may wish to
take advantage of this capability when playing very high resolution audio.
1. To connect the Focus Primary and Client speakers, use a phono cable to connect the “Coax Out” socket (A-4) of the
Primary speaker to the “Coax In” socket (B-4) of the Client speaker.
The wired connection between the speakers will automatically take over from the wireless connection. This can be
confirmed via the Set-up and Control app: Settings > Speaker Info.
For the location of the coaxial input and output sockets, see Illustration: Focus Speaker Sockets .
Note
Always use good quality audio cables with your Focus speakers. Your Dynaudio retailer will be able to advise
on cable choice.
Connecting and Switching On Your Focus Speakers 21