9
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | [email protected] | www.dynaset.com
HYDRAULIC MAGNETS
GENERAL
1.5. MAIN COMPONENTS OF THE HMAG PRO
Picture 4: HMAG’ PROs main components
1. Type plate (also behind
the service hatch)
2. Serial number
3. Hydraulic pressure line (P)
4. Hydraulic return line (T)
5. Service hatch
6. Lifting hooks
7. Magnet generator’s cover
8. Magnet coil assembly
9. Magnet socket’s cover
10. DYNASET CMG PRO
magnet generator
1.6. IP
(
Ingress Protection) CLASSIFICATION
HMAG PRO hydraulic magnets are IP classified according to the IEC standard 60529
for the degrees of the protection of the electrical equipment. The protection class
of a standard HMAG PRO hydraulic magnet complies with the specifications of the
IP23.
From the IP classification guide you can check your IP class information.
