manualshive.com logo in svg

Dynaset GENSCO HMAG PRO 1200-49, Руководство пользователя

Поделиться
Скачать
Dynaset GENSCO HMAG PRO 1200-49 Скачать руководство пользователя страница 29

30

Dynaset Oy  |  Menotie 3, 33470 Ylöjärvi  |  puh. 03 3488 200  |  [email protected]  |  www.dynaset.com

 HYDRAULIC MAGNETS 

MAINTENANCE

6.3.  ACCESSING THE GENERATOR

Open either the service hatch or remove the entire magnet’s cover to access the 

HMAG PRO’s generator. 

The service hatch can be used when checking hydraulic and electric connection 

or display’s notifications. For maintenance the cover has to be removed.

REMOVING THE COVER

The  HMAG  PRO’s  cover  is  held  by  12  bolts.  To  remove  the  cover  follow  these 

instructions.

1. Set the HMAG PRO on to a steady and flat platform.

2. Disconnect hydraulic hoses from the magnet. Remember to disconnect and plug 

the hoses inside the cover!

3. Unscrew the bolts(12).

4. Slowly lift the cover off.

To install the cover follow the instructions in reverse order.

Picture 16: Removing the cover of the HMAG PRO

Содержание GENSCO HMAG PRO 1200-49












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды