The period of Warranty is one year from the date of purchase by the original purchaser. Defects
in material and workmanship, which occur within the duration of the warranty, are covered with
some exceptions that are detailed on www.dynaplug.com. It’s the responsibility of the
purchaser to provide dated proof of purchase, to contact [email protected] to obtain
warranty service options and to use reasonable care in the operation and maintenance of the
Inflator as described in this manual. Customer is responsible for warranty repair shipping.
DYNAPLUG® MINI PRO INFLATOR DMPI-‐1311
•
Rugged and Compact ABS Case
•
Polyurethane Coiled Air Hose Stores Onboard
•
Bright and Efficient LED Work Light
•
Zero Loss Inflation Valve Stem Connector
•
Accurate, Easy-to-Read LED Backlit Pressure Gauge
•
PolarChex™ Polarity Protection
•
Power Cord Storage Compartments
•
RoHS Compliant Product
SPECIFICATIONS*
√
Inflator does not turn ON
Push power plug firmly into receptacle, then twist it back and forth; check receptacle and plug terminals
for dirt (don’t use fingers or metal); check vehicle’s power outlet fuse—it should be 15amps minimum.
√
Inflator does not inflate
Be sure connector is on valve stem securely and well threaded. Check tire for leaks, and check hose
for breaks and leaks at fittings.
√
How to check/change the cigarette plug fuse
Unscrew tip of plug adapter, remove fuse and inspect. If
necessary, replace fuse with one of the same amperage.
√
Inflator is running slowly
The battery voltage may be too low. Check battery with a volt meter.
√
Tire is totally deflated
Sometimes a totally deflated tire can separate from rim and air can leak during inflation. If this
happens, you could jack up the tire before inflating it to allow bead to seat.
TROUBLESHOOTING
FEATURES AT A GLANCE
The
Dynaplug® Mini Pro Inflator
is the ideal product choice to inflate and to
maintain proper pressure in tires on motorcycles, vehicles, ATV’s, trailers,
bicycles and in many other inflatables.
LIMITED WARRANTY
Max Pressure
50PSI/3.5kg/cm
2
Flow Rate
0.50cfm @ 0psi/14lpm@0psi
Weight
18.2oz/516g
Air Outlet
Zero Loss Inflation Valve Stem Connector
Additional Fittings
Sports Inflator Tips (3)
Inflation Rate
7 minutes, 195/60/R15 tire
Run Duration
30 minutes/20 minutes cool down time
Voltage
12VDC
Max Current
6AMP
Power
72W
Noise
69 dB
Motor
Geared, fan cooled
Dimensions
4.75”X6”X2”/120mmx150mmx50mm
Power Cord Length
9.34’/3.0m
Recommended Fuses
Cigarette Lighter Receptacle: 15AMP
Cigarette Plug: 250V/15AMP
Air Hose Length
3.25’/1.0m
Certfications
CE, RoHS, TUV Factory
Warranty
Limited One Year
Accessories, instructions, videos &
helpful hints
www.dynaplug.com or [email protected]
Customer Service
For information regarding operation or repair,
please call 1.530.345.8000
© Dynaplug 2013 Chico CA USA
WARNINGS BEFORE USE
WARNINGS BEFORE USE
Please read and save these instructions. Read carefully before attempting to operate.
Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in voiding the Warranty, personal injury and/or property
damage.
√
For use with 12VDC outlet rated 10Amps or higher.
√
DO NOT leave Inflator unattended while the unit is running.
√
Over inflation can cause property damage and/or personal injury.
√
Never exceed the recommended pressure for any inflatable.
*Specifications subject to change without notice
