Dynapac F1800C, Руководство по эксплуатации и техническому обслуживанию

Страница: 160 / 348

D 30.18 6
Operating panel
The operating panel can be adjusted to the various operating positions: left/right, sit-
ting/standing. The entire operating panel can be swivelled for operation beyond the
outer edge of the vehicle.
m Make sure it is latched properly!
f Only adjust the operating position whilst the vehicle is stationary!
Pushing the operating panel:
- Release the panel latch (2) and slide the panel console to the required position.
- Insert panel latch (2) into one of the detent positions (4).
Swivelling the operating panel:
- Lift latch (5), swivel operating panel to the required position and allow latch to en-
gage again in one of the intended detent positions.
Raise/lower the operating panel:
- Release clamping lever (6), lift or lower operating panel.
Tighten clamping lever (6) in required position.
Steering wheel, inclination adjustment (
o
):
- Press latch (7), swivel steering wheel to the required position and allow latch to en-
gage again.
A
During longer interruptions and after work has been completed, cover the operating
panel with the vandalism protection facility (8) and lock in position.
Service brake ("foot brake") (
o
)
The brake pedal (9) is in front of the driver's seat.
A
When the brake is actuated, the speed of the travel drive is automatically reduced (re-
gardless of the drive lever position).
- If the vehicle was brought to a standstill with the service brake, it cannot be driven
away again until after the drive lever has been put into neutral!