Dynapac F1000T страница 127 Скачать руководство пользователя

Страница: 127 / 238

D 3.0 7

D_3.0_

01_U

S.fm 7

On/Off switch of working lights (1)

Toggle switch (1) to switch on all in-

stalled working lights.

On/Off switch hazard flasher (2):

Activate switch (2) to switch on installed

flasher.

Warning Beacon

NOTE:

The function of the warning beacon must

be checked daily before starting work.

Place the warning beacon onto the

plug-in contact and secure with a wing

bolt (1).

Slide the warning beacon with tube (2)

to the desired height and secure with

the both clamping screws (3).

Turn the switch on to activate the

warning beacon.

NOTE:

The rotary warning beacon is easy to remove and should be stored securely when the

work is done.

Содержание F1000T















































































































































































































































Результаты поиска

Содержание F1000T

Отзывы:

Похожие инструкции для F1000T

Бренды по названию

Популярные бренды

Dynapac F1000T, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание F1000T

Отзывы:

Похожие инструкции для F1000T

Бренды по названию

Популярные бренды