18
CP221/271 O221EN5
Coconut mats (optional)
– Applied
Fig. 20 In measure mode
1. Coconut mats
OPERATION (Optional)
Remove the locking pin at each end of the rod.
Pull out the rod and allow the scrapers to rest in their
working mode against the tires.
Insert the rod in the existing holes above the scraper.
Fit the locking pins.
Remove the locking pins and pull out the rod.
Lift the scrapers and put the rod in the same place
through existing holes under the scrapers.
Fit the locking pins.
Disengaged
Fig. 21 Out of measure mode
1. Coconut mats
1
1
Adjusting tire pressure while
driving (optional)
Fig. 19 Operator’s station
26. Tire pressure control valve
Using the tire pressure control on the roller, the opera-
tor can vary the pressure while work is in progress.
Using control valve (26) on the instrument panel, the
pressure can be adjusted infinitely between 240 kPa
and 830 kPa (35 to 120 psi).
26
