Dynapac CC 622, Руководство по обслуживанию

Страница: 12 / 39

10
CC 622/622HF M622EN3
EVERY 10 HOURS OF OPERATION (Daily)
Diesel engine,
oil level – Check
Fig. 2 Engine compartment
1. Oil dipstick
2. Filler cap
Place the roller on a level surface. Switch
the engine off and push in the reserve/
parking brake knob for all checking and
adjustments on the roller, unless otherwise
specified.
The oil dipstick is accessible through the right door of
the engine compartment.
Beware of hot parts of the engine and ex-
haust pipe when taking out the oil dipstick.
Observe caution. Wear gloves and safety
goggles.
The dipstick is located on the short side of the engine
above the hydraulic pumps.
Pull up the dipstick (1) and ensure that the oil level is
between the upper and lower mark. For further details,
see the engine manual.
Coolant level – Check
Check that level of the coolant is between the max. and
min. marks.
Observe caution if the filler cap must be
opened while the engine is hot. Wear glo-
ves and safety goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See page 3 in these instructions and in the engine
manual.
Flush the system every other year and
change the coolant. Ensure also that air can
flow unrestricted through the radiator.
1 2
1 2
6
5
4
3
Fig. 3 Radiator
1. Filler cap
2. Level/max. mark
3. Level/min. mark
4. Intercooler
5
. Radiator
6. Hydraulic fluid cooler