U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
6. Installation & Preparation
6.1.
Cautions
Check whether the type of device, spare parts and number are same with that
of packing list. Make sure the device appearance is in excellent condition.
There must be drying process if the device has been damp.
To make sure normal working of the device, please follow the following steps:
●
Read this manual carefully
●
Fix and install the device
●
Prepare the fiber and E1 cable
●
Connect the fiber or other cables
●
If this is your first use of the device, please refer to configuration manual
and command manual.
●
Use the device properly
6.2.
Installation
6.2.1. Cable preparation
The cables you need to prepare are
:
Table 6-1 OPCOM3100-155 cable specifications
Interface
Specifications
10/100Mbps Ethernet
electrical
interface/SNMP
interface
100Base-T category-5 UTP, the maximum distance is
100m.(users provide)
CONSOLE cable
Refer to appendix.
Optical fiber
Multi mode fiber or single mode fiber with SC/SC or
SC/FC connector (customized)
E1cable
Special 2mmE1 cable.
Power supply
interface
AC, 220V/10A power supply cable.
-48V DC, -48V/10A power supply cable.
+24VDC, +24V/10A power supply cable.
6.2.2. Install the extension slot
E1 and EOS sub card can insert into extension slot and cannot hot-swap.
17
