Dynamic DX-REMG91, Руководство по установке

Страница: 66 / 80

GBK63648
:
Issue 3
– February 2012
60
7.4 G91 Specific Indications
1. Incompatible Programs “F”
The G91 is not directly compatible with earlier versions of DX programs. If „F‟ ( F ault) is
displayed on the 7 segment display, the G91 has been programmed with a
incompatible version of program.
To rectify the issue, program the G91 with a compatible program.
2. Joystick Fault “J”
If a G91 is switched on without a selected joystick/input device connected and
operational, the 7 segment display will show „J‟.
To rectify the issue, connect the selected input device and check the program.
Please contact your local Dynamic Representative for further details and assistance.
7.5 Limp Mode
If the DX System detects some very rare faults, it will revert to Limp Mode. This is a
reduced speed mode that recognizes problems, but allows the wheelchair user to
limp home where the problem can be assessed.
Warning:
If the DX System is displaying a fault or the chair enters Limp Mode, do
not operate except to reach a safe environment. Proceed with
caution as the chair performance may be significantly altered. Have
the chair serviced by an authorized agent.