Dynamic Mounting Down and Out Mount Скачать руководство пользователя страница 1

 

Down and Out Mount,

 installation and assembly.

www.DynamicMounting.com

 

 

 1

DOWN AND OUT MOUNT

Installation and Assembly

  

   

                 

 

ATTENTION!   It is important to study these instructions carefully.  Read all the instruc-

tions before starting.  Pay special attention to proper placement and adjustment.  Fol-

lowing these instructions in sequence will save time and avoid problems.

SET UP AND INSTALLATION:

1.  ATTACH HANGERS TO SCREEN  

2.  ADJUST COUNTER-WEIGHT STRENGTH  

3.  PLACE THE MOUNT  

4.  ATTACH THE MOUNT TO THE WALL  

5.   HANG THE TV ON THE MOUNT  

6.   FINE-TUNE THE COUNTERBALANCE  

7.  ADJUST THE TOP AND BOTTOM TILT   

8.  ATTACH RUBBER BUMPERS  

9.   ATTACH AND DRESS CABLES  

10.   HANG THE PAINTABLE WALL PLATES

SEE OUR INSTRUCTIONAL VIDEO at

 www.DynamicMounting.com/Install

Proper and safe installation of this product will require professional level tools 

and experience; if you are not competent, engage the services of a professional. 

These instructions are intended as an overall guide, and may not cover all possible 

circumstances. 

The consumer is responsible for correct and secure mounting. Dynamic Mount-

ing is not responsible for any damage, injury, or death resulting from improper 

mounting or use of the Down And Out Mount. 

The Down And Out Mount is rated for a

 maximum load

 of 125 lbs.  Do NOT 

exceed. 

The Down And Out Mount is 

only

 designed for use with flat panel televisions.

For assistance, contact Dynamic Mounting at: 

[email protected]

HEAT DAMAGE!

 

 

Electrical equipment placed near a heat source is at risk of damage.  Do not expose your electri-

cal equipment or television to undue heat.  Take all necessary precautions when mounting equipment over or near a 

fireplace.  Dynamic Mounting takes no responsibility for damage from a fireplace or other heat source to the television, 

the mount, or other accessories. 

FIREPLACES! 

 When mounting the Down And Out Mount over a fireplace with a mantel, do NOT install the Down 

And Out Mount such that more than half of the TV can be moved below the mantel.           

The DOWN AND OUT MOUNT, from Dynamic Mounting, offers an efficient 

mounting solution for large flat screen TVs.  Primarily designed for use over 

shelves or fireplaces, offering up to 32 inches of vertical travel and adjustable tilt.

    WARNINGS!

CONTENTS:

SPECIFICATIONS 
PACKAGE CONTENTS 
REQUIRED TOOLS AND 
EQUIPMENT 
BEFORE YOU START  
PLACEMENT

MAINTENANCE:

GENERAL MAINTENANCE 

ADJUSTING ANY PLAY IN THE 

COUNTERWEIGHT MECHANISM AND 

REDUCING NOISE

APPENDICES

OPTIMAL PLACEMENT ABOVE  A 

SHELF

MINIMUM CLEARANCE OVER SHELF

WARRANTY

Содержание Down and Out Mount














Отзывы: