Dynamic Displays 17C3 A/D Series Скачать руководство пользователя страница 20

 

Dynamic Displays, Inc.                                                 User Manual                                                                       Doc: 0048070 
1625 Westgate Road                                                17C3 A/D Series                                                                                     Rev 2 
Eau Claire, WI  54073                                                    Glee 17C3                                                                         Page #20 of 26 

Contact the Sales department at Dynamic Displays, Inc.  
800-793-6862. 

Characters Missing On Left Or Right Of 
Image 

The timing is special and not programmed In the MCU. 

Contact the Sales department at Dynamic Displays, Inc.  
800-793-6862. 

 
 

CLEANING INSTRUCTIONS 

 

When cleaning, unplug the AC adapter from the LCD display and outlet for safety. 

 

Lightly wipe dirt from the cabinet and LCD panel surface with a clean lint-free cloth soaked in a neutral cleaning 
solution.  This removes dust and other particles that can scratch the screen 

 

Treat the LCD panel with care.  Do not rub the LCD panel surface with a rough item or hit it on the surface. 
Also, do not strongly press the LCD panel surface.  This can lead to unevenness in the screen and also 
failure of the product. 

 

Cleaners recommended for the LCD panel are isopropyl alcohol (without abrasive), non-ammonic glass 
cleaner, and watered-down neutral cleaning solution.  Do not use organic solvent such as acetone and 
toluene. 

 

Do not use thinner, benzine, alcohol or such on the plastic cabinet.  These can damage the cabinet, alter its 
quality and cause the paint to peel off. 

 

Do not apply insecticides and other volatile items to the cabinet.  Also do not leave rubber and vinyl products or 
such in contact with it for long hours.  This can cause the surface quality to alter and the paint to peel off. 

 

 

Содержание 17C3 A/D Series



























Отзывы: