Dynalink RTA1320, Руководство пользователя, Страница: 82 / 137

ADSL Router User Manual
Connection Type
des several protocols for you to choose. Your ISP will offer you the
ings of the protocol. Before you set this page, please refer to the
sulation
n this
The system provi
most suitable sett
protocol that your ISP offered.
After clicking on the Next button from
the VPI/VCI web page, the following
screen will appear. Please choose the
connection type and encap
mode that you want to use and click
Next for next page.
For instance, PPP over Ethernet
(PPPoE) is selected i
demonstrative figure.
PPP over ATM/ PPP over Ether
If the connection type you choose is P
refer to the following information.
net
PP over ATM or PPP over Ethernet , please
ISP’s configuration
can choose PPPoE
According to the
on the server, you
or PPPoA modes.
Choose PPPoA or PPPoE and click
Next .
On this screen, you have to make
settings for WAN IP. To get the IP
address automatically, click the
Obtain an IP address automatically
radio button. Or click Use the
following IP address button and
enter the IP address for WAN
interface.
Check Enable NAT if y
the
ou need.
k.
an
to
;
t procedure.
MTU:
It means the maximum size of the
packet that transmitted in the networ
The packet of the data greater th
the value set here will be divided in
several packets for transmitting.
The default setting for PPPoE is 1492
while for PPPoA is 1500 .
Click Next for the nex
70