Dynalink RTA1320, Руководство пользователя, Страница: 103 / 137

Chapter 4: Web Configuration
Example – Static Route
Here provides you an example of Static Route.
For the LAN shown above, if the PC in the subnet of 192.168.1.x wants to acce
the PC in the subnet of 192.168.10.x, we can set a static route in the ADSL route ss
r, in
PC in the subnet 192.168.10.x and the gateway is router
s:
ard Class C)
)
c Routing
tilized by means of exchanging routing
routers to determine optimal routes. This
function.
rsion:
RIP info ation
data, or select Passive for receiving
data only.
isable this function.
Click Apply to invoke the settings set
which the destination is the
B. The setting would be as follow
Destination: 192.168.10.0
Netmask: 255.255.255.0 (Stand
Gateway: 192.168.1.254 (Router B
IP Routing – Dynami
Routing Information Protocol (RIP) is u
information between routers. It helps the
page allows you to enable/disable this
RIP Ve
It incorporates the rm
when receiving and broadcasting the
RIP packets. From the drop down
menu, select a RIP version to be
accepted,
1, 2 or both .
Operation:
There are two modes for you to
choose, Active and Passive. Select
Active for transmitting and receiving
Enabled:
Check Enabled to enable the RIP
function on different interface.
Otherwise, d
here.
91