13
14
IMPORTANT
• Do not let any child touch the wheels or be near them when the ride-on ride-on toy
is moving.
• To avoid accidents, please inspect the ride-on toy before riding to ensure that it
is in proper working order and safe to ride.
• This toy has no brake; to stop, take your foot off the foot pedal.
• Check all the screws, cap nuts and protective coverings regularly and tighten as
required. Check plastic parts on a regular basis for cracks or broken pieces.
• Your new battery must be charged for at least 18 hours before you use it in your
ride-on toy for the first time.
• Do not wash the ride-on toy with water; clean it with a cloth.
SAFETY PRECAUTIONS
• Children must have adult supervision at all times.
• Do not ride on the road or footpaths, or near pools or bodies of water.
• Do not allow children under the recommended age to ride the ride-on toy; please
refer to the age grading.
• Do not allow riders over the recommended weight rating or age grading to use
the ride-on toy.
• To stop the ride-on toy, you must take your foot off the foot pedal.
• Charging should only be done by an adult.
• An adult must teach the child how to operate the ride-on toy.
• Do not ride on hills or slopes, in sand or on other soft, wet, or slippery surfaces.
• Do not use a different size battery. Use only original or recommended
replacement battery.
• The ride-on toy is designed to carry only one rider at a time. Never allow more
than one rider or over-load the ride-on toy.
• This product should be assembled and checked by adults before use.
WARNING:
Disconnect the power connector from the battery connector before
conducting any maintenance procedures
.
TOOLS REQUIRED:
Phillips Screwdriver
(not included)
HOW TO REPLACE THE BATTERY
1. Unscrew the screw on the seat with a screwdriver and remove the seat.
2. Gently pull out the wires and unplug the power connector from the battery
connector (which is connected to the battery). Note: Make sure the connectors and
wires do not slide into the battery compartment.
3. Unscrew the 4x12 screw as shown (see diagram 3), and draw the battery retainer
out of ride-on toy body.
4. Remove the old battery and replace with a new one.
5. Plug the power connector into the battery connector connected to the new battery,
and then gently reinsert the connectors and wires into the battery compartment.
Then insert the battery retainer into the vehicle body and secure it with the 4x12
screw. Reinstall the seat using the screw removed in step 1, see above.
DETAILED MAINTENANCE AND REPAIR
F
1
Power
Connector
Battery
Connector
4 x 12 Screw
Battery
Battery Retainer
2
3
