8
9
3. FRONT WHEELS
• Note different shapes of wheel pegs
and corresponding slots on vehicle
body.
• Insert one front wheel assembly into
correct slot on body, and snap into
place.
• Repeat for other side, and ensure that
front wheels are completely seated.
5. DOORS
• Insert doors tabs into sloots on car
body.
• Ensure that door assemblies are
completely seated.
6. ROOF
• Place roof into position on front window
and rear window assemblies. (See below
graphic)
• Tighten six screws
(Type A - Dia. 4mm x
20mm x 8pcs) with
Phillips screwdriver.
CAUTION:
Overtightening screws may
result in damage.
7. FRONT WINDOW
• Insert front window assembly tabs into
slots on car body.
8. REAR WINDOW
• Insert rear window assembly tabs into
slots on car body.
• Tighten two screws (Type A - Dia. 4mm x
20mm x 8pcs) with Phillips screwdriver.
CAUTION:
Overtightening screws may
result in damage.
Front wheel
Front wheel
Body
Front
Rear
Rear window
assembly
Screw
Front window
assembly
Rear window
assembly
Screw
Roof
Front window
assembly
Steering
wheel
assembly
Steering
wheel
attachment
Screw
4. STEERING WHEEL
• Turn car over to upright position.
• Slide steering wheel assembly and
attachment into slot on dashboard.
• Tighten screw with nut (Type B - Dia.
4mm x 38mm x 1pcs) with Philips
screwdriver.
CAUTION:
Overtightening
screws may result in damage.
Seat back
assembly
Car body
Seat back
attachment
10. BACK SEAT
• Slide seat back assembly into slot on
car body.
• Tighten two seat back attachments
from bottom.
CAUTION:
Overtightening
screw may result in damage.
