6
7
If you experience a problem with this product, or are missing a part, please call us
at
1-800-551-0032,
rather than return this product to the store.
Please identify all parts before assembly and save all packaging material until
assembly is complete to ensure that no parts are discarded.
WARNING:
DO NOT USE NON-ORIGINAL OR
NON-RECOMMENDED PRODUCTS WITH YOUR
NON-ELECTRIC RIDE-ON TOY.
Altering of the original components or use of non-recommended replacement
parts may or may not be compatible with the design and will void the warranty and
may cause an unsafe condition resulting in serious injury or death.
• Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come
in contact with wheels or other moving parts.
• Before each cycle of operation, you must perform the pre-operation checks
specified in this manual, including:
– that the area that the unit is to be operated in is safe and suitable for safe
operation;
– that all safety labels are in place and understood by everyone, including the
riders;
– that tires/wheels are in good condition;
– and that no parts are broken or worn.
• Avoid sharp bumps, drainage grates, and sudden surface changes.
PRE-RIDE SAFETY CHECKLIST
• Check to make sure that all parts and components are properly secured and are
functioning according to the manufacturer’s specifications.
• Components must be maintained and repaired and only with the manufacturer's
authorized replacement parts. Installation should be performed only by adult,
qualified personnel.
WARNING:
FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF
POTENTIALLY SERIOUS INJURY. USE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR
APPROPRIATE CLOTHING AND SHOES.
TOOLS REQUIRED:
ASSEMBLY
Your new vehicle requires adult assembly. Please set aside around 20 minutes for
assembly. Please identify all parts before assembly and save all packaging material until
assembly is completed to ensure that no parts are discarded.
WARNING:
THE NON-ELECTRIC RIDE-ON IS TO BE ASSEMBLED BY AN ADULT. As
shipped in the box it is partially assembled and contains potentially hazardous sharp edges
and points on screws in the unassembled state. The box contains a package of small parts,
cap nuts and fasteners that pose a choking hazard to small children. Assemble the non-
electric ride-on without your child’s help and keep these hazards away from your child until
assembly is complete.
Phillips Screwdriver
(not included)
Type A - Dia 4mm x 20mm x 8pcs
Type B - Dia 4mm x 38mm x 1pcs
B
1. FOOT REST AND FENDER
• Turn car body upside down.
• Insert foot rest into bottom of seat
and snap into place.
• Ensure that foot rest is completely
seated.
2. REAR WHEELS
• Insert rear wheel assembly into axle
guides, push two spacers onto both
ends, and snap axle into place.
• Ensure that rear wheel assembly are
completely seated.
Fender
Foot rest
Spacers
