Dynacord SR20TGX-EU, Руководство по установке

Страница: 15 / 28

TGX Amplifier System Rack Connector panel CP34 | en 15
Bosch Security Systems, Inc. Installation manual 2019-03 | 02 | F.01U.346.534
6 Connector panel CP34
The TGX system racks features the CP34 connector panel, designed for three 4-channel
amplifiers with OMNEO networking. All connections for the OMENO network (incl. Dante
audio and OCA), additional analogue and AES-3 inputs and the outputs to the speakers are
available. The three TGX amplifiers are connected via the network switches for glitch free
redundancy.
Figure 6.1: CP34 connector panel, front view
1. Blank cover for customer options (e.g. optical network connectors)
2. Primary OMNEO/Dante network connection on etherCon RJ45
3. Secondary OMENO/Dante network connection on etherCon RJ45
4. XLR audio connections (inputs and through) for analogue line level and AES-3
5. NL8 speaker connectors (2 in parallel) Pins 1 - 4 for channels A - D
6.1 Internal wiring
The SRTGX system racks are pre-wired and pre-configured for use via the connector panel.
Figure 6.2: Audio wiring scheme: analogue/AES3 inputs and amplifier outputs