00P5DG080F4SEB2
1
Ernitec EDNS V3000
Setup Guide
Package Content
Inspect the packaging carton. Make sure the
Ernitec EDNS V3000
is properly delivered. Remove
all items from the box and make sure the box contains the following items.
Ernitec EDNS V3000
SATA Cable
Power
Adaptor*
Power Cord
User
’s
Manual
*Power adaptor is provided for Standard Models only.
Front Panel
1
Play
Press once to start the playback of recorded video. Press again to exit.
2
Pause
Press this key to freeze the current viewing screen.
3
Sequence
Press this key to start automatic sequence display of cameras.
4
Display
Press this key to view in full-screen or multiple window modes.
5
Menu
Press this key to enter the OSD setup menu.
6
Search
Press this key to search recorded video by date/time or event.
7
Exit
Press this key to cancel or exit from certain control mode.
8
Channels
1. In Live and Playback modes, press any key to view the corresponding
video in full-screen.
2. In input interface, 1~10 can be used for direct input of numbers 0~9.
3. In Dome Camera Control mode, 1 is for entering the Set/ Go preset
menu; 11~16 is for quick access of preset points 1~6.
9
Alarm LED
It lights up when an alarm is triggered.
10 Network LED
It lights up when network is connected. In addition, it blinks when data is
being transmitted via the network.
11 Record LED
It blinks when videos are being recorded.
12 HDD LEDs
The LEDs light up when disk cloning is in process. When the light is on
with alert beeping, that means the corresponding HDD has error.
13 Shuttle/ Jog
This is used to control playback operations.
14 USB 2.0 Port
The USB 2.0 port allows users to connect an external USB device to the
unit, such as a USB ThumbDrive or a USB mouse.