Optional Accessories
Machine Specifications
DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2001
PRINTED IN USA
Visit our Web Site: www.dynabrade.com
Email: [email protected]
96437 Motor Tune-Up Kit:
•
Includes assorted parts to help
maintain and repair motor.
96405 Motor Repair Kit: (not pictured)
•
Contains special tools for
Disassembly/Assembly of machine.
80030 Training and Maintenance Test Equipment Kit:
•
80025 Load Cell measures tool RPM under load and useful for training operators
for proper buffing pressure/operation. Electronic tachometer pick-up securely
fastens to wear plate.
•
94315 Pressure Gage to ensure peak operating performance.
•
95842 Air Lube formulated for pneumatic tools. Prevents rust and formation of
gum/sludge for longer tool operation with greater power and less downtime.
•
96368 Tachometer used to measure tool RPM.
96392 Tune-Up Video
Filter-Regulator-Lubricator
11405: 40 SCFM @ 100 PSIG, 3/8" NPT female ports.
•
Provides accurate air pressure regulation, two stage filtration of water/contaminants and
lubrication of pneumatic components.
INTROD
UCTION
TO THE
DYNABR
ADE DYN
AFILE
INTRODUCT
ION TO THE
DYNABRAD
E DYNAFILE
DYNABRADE, IN
C.
8989 Sheridan Drive
Clarence, NY 14031-1490
Phone: (716) 631-0100
FAX: (716) 631-2073
DYNABRADE
®
DYNABR
ADE
®
Motor Assembly/Disassembly Instructions – 3" Dynabuffer
(continued)
7. Spread 1 drop of #271 Loctite
®
(or equivalent) around the threads of the inlet bushing and tighten into housing to 28 N•m/250 in. - lbs.
Note: Motor should operate at between 9,000 and 11,000 RPM free speed with 80 PSIG of air at the inlet of the tool. RPM should be checked with a tachometer. Before
operating, we recommend that 2-3 drops of Dynabrade Air Lube P/N 95842 (or equivalent) be placed directly into the air inlet with throttle lever depressed. Operate the machine
for approximately 30 seconds before application to workpiece to determine if machine is working properly and safely and to allow lubricating oils to properly dispense
through machine.
Loctite
®
is a registered trademark of the Loctite Corp.
Disc Pad Change:
1. Insert 50679 Wrench on flats of 57069 Balancer Shaft and twist off sanding pad by hand.
2. With wrench still in place, hand tighten new pad on tool.
3. No need to remove shroud or overskirt.
Model
Motor
Motor
Sound
Pad Dimensions
Orbit Diameter
Maximum Air Flow
Spindle
Weight
Length
Height
Number
HP (W)
RPM
Level
Inch (mm)
Inch (mm)
CFM/SCFM (LPM)
Thread
Pound (kg)
Inch (mm)
Inch (mm)
57125
.16 (119)
10,000
79 dB(A)
3 (76)
.6 (14)
2/16 (453)
5/16"-24 male
2.6 (1.2)
9-1/4 (235)
3-5/8 (92)
Additional Specifications: Air Inlet Thread 1/4" NPT • Hose I.D. Size 3/8" (10 mm) • Air Pressure 90 PSIG (6.2 Bars)
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade