Page
23
of
23
c. Disengage the latches and remove the power head from the recovery tank.
d. Unscrew the hex nut securing the HEPA filter to the underside of the lid.
e. Spare the washer and gasket placed under the CFE HEPA filter
f. Discard the old CFE HEPA filter
g. Insert the new CFE HEPA filter
h. Securely fasten the CFE HEPA filter using the gasket, the washer and the hex nut.
i. Dispose of the contaminated filter according to government regulations. (If applicable)
13.0 STORAGE
It is recommended that the inside of the recovery tank be clean and dry when storing the
vacuum cleaner system.
14.0 TROUBLESHOOTING:
PROBLEM
PROBABLE CAUSE
SOLUTION
Drop in suction power
Immersion separator may be
full
Empty the immersion
separator
Suction hose or vacuum
tools may be blocked
Clear blockage using a
broom handle or other
appropriate device
CFE HEPA filter may be
clogged
Change the CFE HEPA filter
Содержание 61496
Страница 12: ...Page 12 of 23 9 0 FILTRATION SYSTEM...
