DYNABRADE, INC.
www.dynabrade.com
8989 Sheridan Drive
•
Clarence, NY 14031-1419
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
© DYNABRADE, INC., 2017
MACHINE SPECIFICATIONS
LIFETIME WARRANTY
To validate Dynabrade Lifetime Warranty, you must register each tool at: www.dynabrade.com. Registration of each tool at website is required.
Dynabrade will not honor Lifetime Warranty on unregistered tools. Please view the entire Lifetime Warranty Policy at www.dynabrade.com.
Additional Specifications: Air Inlet Thread 1/2" NPT • Hose I.D. 1/2" (10 mm) • Spindle Thread 5/8"-11
REFERENCE CONTACT INFORMATION
Visit dynabrade.com for your model’s current vibration and sound data.
American National Standards Institute (ANSI)
25 West 43 Rd St. 4th Floor | New York, NY 10036
Tel: 1 (202) 293-8020 | www.ansi.org
Compressed Air & Gas Institute (CAGI)
1300 Sumner Ave | Cleveland, OH 44115
Tel: 1 (216) 241-7333 | www.cagi.org
European Committee for Standardization (PNEUROP)
rue des Drapiers 21 | 1050 Brussels, Belgium | www.pneurop.org
International Organization of Standards (ISO)
P.O box 56 | Ch-1211 Geneve 20, Switzerland | www.iso.org
U.S. Government Publishing Office (GPO)
Superintendent of Documents
732 North Capitol Street NW | Washington, DC 20401
Tel: 1 (202) 512-1800 | www.gpo.gov
Model
Speed
Power
Air Consumption
Diameter
Weight
Length
Height
53280
8,500 RPM
2.8 hp (2,088 W)
115 SCFM (3,256 LPM)
7" (180 mm)
7.3 lb. (3.3 kg)
13.4" (340 mm) 4.2" (107 mm)
53282
6,500 RPM
2.8 hp (2,088 W)
115 SCFM (3,256 LPM)
9" (230 mm)
7.8 lb. (3.5 kg)
13.4" (340 mm) 4.2" (107 mm)
OPTIONAL ACCESSORIES
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
Part No. 95842:
1pt. (473 ml)
Part No. 95843:
1 gal. (3.8 L)
Grease
•
For use when current grease is hard
packed or full of debris.
•
Apply every 1,000 hours of tool use or
everytime tool is rebuilt.
Part No. 96747: 1
4 grams
Whip Hose
•
1/2" diameter air line with 1/2" NPT female fitting,
and 1/2" NPT male Mega Flow Plug.
Part No. 94825:
5 feet
Tune-Up Kit
•
Contains high and medium wear parts.
Part No. 96644
Low Profile Back-up Flange
•
For use with 7/8" diameter center hole flap discs.
Part No. 54981
High Profile Guard
•
Used for type 27 disposable hub flap discs and
any other abrasive that doesn’t properly fit under
the lip of the standard guard.
Part No. 54920:
7" (180 mm) diameter
Part No. 54921:
9" (230 mm) diameter
G
4
