dynabook PORTEGE X30W-K Series, Руководство пользователя

Страница: 89 / 168

Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click
Apply . When the computer is started, this text is
displayed together with the prompt asking you to enter a password.
If you forget your HDD User Password, Dynabook will NOT be able to
assist you, and your HDD will be rendered COMPLETELY and
PERMANENTLY INOPERABLE. Dynabook will NOT be held responsible
for any loss of any data, any loss of use or access to your HDD, or for any
other losses to you or any other person or organization that result from the
loss of access to your HDD. If you cannot accept this risk, do not register
the HDD User Password.
Supervisor Password
If you set a Supervisor Password, some functions might be restricted when
a user logs on with the User Password. To set a Supervisor Password:
Click
Start -> dynabook Settings -> System Password . Then click the
down arrow next to Advanced options to show the Supervisor Password
settings.
This function lets you do the following:
Register, change or delete the Supervisor Password
Specify restrictions for general users
Starting the computer using a password
If you have already registered a user password, there is one way to start
the computer:
Enter the password manually.
The password is necessary if the computer was shut down in Hibernation
Mode or Boot Mode. It is not needed in Sleep Mode or Restart.
To enter a password manually, do the following:
1.
Turn on the power as described in the Getting Started section. The
following message appears on the screen:
Password =
At this point, the function keys do not work. They will function after you
enter the password.
2. Enter the Password.
3. Press ENTER .
If you enter the password incorrectly three times in a row, or if you do not
enter the password within 1 minute, the computer shuts down. In this case,
User's Manual 5-6