manualshive.com logo in svg

Dyna 380, Инструкция по эксплуатации, Страница: 3 / 20

Поделиться
Скачать
Dyna 380 Скачать руководство пользователя страница 3

Model 380 Control Valve 

(8 Inch Only)

Dyna-Flo Control Valve Services Ltd.

 

Phone: 780 

•

 469 

•

 4000       Toll Free: 1 

•

 866 

•

 396 

•

 2356       Fax: 780 

•

 469 

•

 4035       Website: www.dyna

fl

 o.com  

P-388M0319A

3

Operation, Parts, and Instruction Manual

SPECIFICATIONS

Confi gurations

  Refer to Table 1 of the Sales Bulletin.

  Consult your Dyna-Flo sales of

fi

 ce for other available

 con

fi

 gurations.

Sizes and End Connection Styles

  Models            380 & 381

  Size:             8”

  Rating:           ASME 900 & 1500

  Connections:   RF / RTJ / BWE

Maximum Inlet Temperatures and Pressures

  In accordance with ASME B16.34 Class 1500 unless limited 
  by material selection shown in Tables 4 to 7, and Figure 9 
  of the Sales Bulletin.

Maximum Pressure Drops

  Same as maximum inlet pressure unless limited by speci

fi

 c 

  trim construction. For valve assembly shut off pressure drops 
  refer to Table 8 and Figure 9 of the Sales Bulletin.

Shutoff Classifi cations
 

Refer to Table 1 of the Sales Bulletin.

Dimensions

 

 Valve 

Dimensions

    Refer to Table 3 and Figure 2 of the Sales Bulletin.

Approximate Valve Body Weights

  Refer to Table 2 of the Sales Bulletin.

Valve Body to Bonnet Bolting

  Refer to Table 5 of the Sales Bulletin.

Characteristics

 

•

  Equal Percentage (Standard)

 

•

 Modi

fi

 ed Equal Percentage

 

•

 Linear

 

•

  Contact factory for Low-Noise and Anti-Cavitation options.

Flow Direction
 

Flow down through seat ring except when using Low-Noise 

 trim.

Packing Type and Examples

  The standard packing is PTFE V-Ring. Live loaded low 
  emission, graphite and other packing arrangements are 
  also available. Refer to Figure 8.

Flow Coeffi cients

  For standard coef

fi

 cients at maximum travel, refer to Table 7 

  of the Sales Bulletin.
  For full list of coef

fi

 cients refer to document P-CVSM.

Valve Travel

  Refer to Table 7 of the Sales Bulletin.

Trim Materials

  Refer to Table 6 of the Sales Bulletin.

Materials

  Body and bonnet material options include:

  LCC (A350-LF2 optional* bonnet material) 

  WCC (A350-LF2 optional* bonnet material)  

  CF8M (A182-F316 optional* bonnet material)

 

*NOTE:

 Dyna-Flo reserves the right to substitute a cast 

  material with the forged bar equivalent in the event a casting 
  is not available.

  Refer to Figure 8 of the Sales Bulletin. Refer to Tables 4 & 5  
  of the Sales Bulletin for typical construction materials. Refer 
  to Table 6 of the Sales Bulletin for trim selections.

For more information and other options contact your Dyna-Flo 
sales of

fi

 ce.

Содержание 380





















Отзывы:

Нет отзывов