PAGE 1 OF 12
0220 IH-8683
π
H-8683
DYMO LABELWRITER
®
WIRELESS
1-800-295-5510
uline.com
FEATURES
SOFTWARE INSTALLATION
PRINTER FEATURES
This LabelWriter printer is a direct thermal
printer and does not use ink or toner.
Instead, it uses heat from a thermal print
head to print on specially treated heat-
sensitive labels. Labels are the only supplies
needed.
POWER
The
button turns the label printer power
on and off. After five minutes of inactivity, the
printer will enter power-saving mode and
the printer status light will glow.
LABEL FEED BUTTONS
The label forward feed button
on the side
of the printer advances a single label.
The label reverse feed button
reverses
label out of label exit slot and is used
to remove labels from the printer when
changing rolls.
Software must be downloaded from the manufacturer's website.
Visit www.dymo.com/en-US/online-support for more information.
Cover
Handle
Label
Roll
Label
Spool
Label
Guide
Label Exit Slot
and Tear Bar
Label Release
Lever
Label Forward
Feed
Label Reverse
Feed
Power (On/Off)
Printer Status Light
Wireless
Status Light
24VDC
WPS
RESET
Power
Connector
USB
Connector
Reset
WiFi Protected
Setup (WPS)
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.