8 |
WID EC U RE
®
C ON VEYO R U SER GU ID E
D YMAX. C O M
7.
Reattach the Bottom Panel to the front of the machine.
8.
Remove the Foam Shipping Blocks that supported the Lamps during shipping.
Figure 2. Front Bottom Panel for Access to Forklift Pockets
Product Overview
Description of the
WIDECURE
Conveyor
The
WIDECURE
conveyor system is designed to offer consistent, fast, and safe curing. Equipped with a 25
”
-wide belt
and a 24”
curing width, this system is ideal for curing light-curable materials on larger parts or larger quantities of smaller parts. It can be
outfitted with either a longwave or a shortwave bulb, giving manufacturers the ability to cure a wider range of light-curable
materials.
Designed to help manufacturers build a more reliable cure process, users can easily control various curing parameters through a
touch-screen control panel. This feature gives the user greater curing flexibility and enables them to tailor the curing conditions to
their specific application. The system’s tightly controlled belt speed
and minimal bulb degradation also allow better control over
cure. This provides repeatable curing profiles and a more reliable process with less risk of variance.
Standard Features
Adjustable Lamp Height
–
The
system’s
internal lamp may be adjusted from 4" to 24" above the belt. This allows curing of a wide
variety of larger parts.
Adjustable Leveling Feet
–
The conveyor
is equipped with ½”
-13 threaded holes with leveling feet installed. The machine also
features 4 mounting brackets with ½
” clearance
thru-holes, so the machine can be permanently installed to the floor.
Direct-Drive Motor
–
The conveyor runs off a 1/3 HP 50:1 ratio right angle gear motor, coupled to a 1:1 ratio cogged belt. The
motor is VFD controlled.
