dymax ACCU-CAL, Руководство пользователя

Страница: 8 / 12

8 USE R GUI DE
|
ACC U- CAL ™ 5 0 R ADI OME T E R
Maintenance
The ACCU- CAL™ 50 was designed to operate with minimum
maintenance. Follow the schedule below to assure top unit
performance.
• Calibrate the instrument at least annually. Calibration
service is available through Dymax Customer Service or
Dymax Product Repair.
• Change the batteries when a low battery warning is
received. The ACCU-
CAL™ 50 uses two AA -type
batteries. The battery compartment is on the back of the
instrument.
• Keep the detector head’s sensing element clean and free
of contaminants. The detector head may be cleaned with
a clean tissue wetted with isopropyl alcohol.
• To increase battery life, turn unit power off after use. The
unit will not automatically power off.
Spare Parts and Accessories
Item Part Number
Adapter Kit – Flood to Spot Model (includes parts listed below) 39554
Lightguide Simulator 38408
8-mm Lightguide Adapter 39558
5-mm Lightguide Adapter 39557
3-mm Lightguide Adapter 39556
Specifications
Property Specification
Power Two AA size batteries
Display
LCD Graphic Display 97x 32 Pixel
Display area: 0.56 in x 1.41 in (14.3 mm x 35.8 mm)
Detector Interface 9-Pin MDSM9 socket, 4 inputs
Measurement
Ranges Four modes of operation
Auto range within each operating mode
Front Panel Control 3 buttons
Temperature
Operating: 5 to 40°C
Storage: -10 to 50° C
Size 5.71 in x 2.48 in x 1.18 in (145 mm x 63 mm x 30 mm)
Weight 0.33 lbs (150 g)
Figure 7.
Battery Compartment (Closed & Open)