- 1 -
INSTALLATION INSTRUCTIONS
SA
VE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
7302302-100 Rev. A (6/17)
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY, HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
Visit www.DXV.com for French and Spanish Installatio Instructions.
!
Lowell
™
Console Lavatory Kit
Models: D20070001 — Single-Hole Lavatory
D20070008 — Three-Hole Lavatory
D21420026 — 26" Console
D28005000 — Towel Bar
(optional component)
Lowell Lavatory can be installed without console
FINISHED
WALL
1-3/8" D. (35 mm)
FAUCET MOUNTING
HOLES
21"
(535 mm)
26"
(659 mm)
2-3/4"
(70 mm)
9"
(230 mm)
8"
(203 mm)
18-1/4"
(464 mm)
1-3/4" D.
(45 mm)
15-3/4"
(401 mm)
FINISHED
FLOOR
22-7/16"
(570 mm)
1"
(25 mm)
FRONT/REAR BARS
ø 18.5 mm on both sides
ø 25 mm at the center
23-1/16"
(585 mm)
20-5/16"
(570 mm)
6-5/16"
(160 mm)
3/4"
(19 mm)
1-1/16"
(27 mm)
34-5/16"
(872 mm)
7/8" (22 mm)
8"
(203 mm)
22-3/4"
(578 mm)
20-1/2"
(521 mm)
SUPPLIES AS
REQUIRED
1-1/4" O.D.
WASTE
1-1/4" O.D.
TAILPIECE
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools
and materials, which are available from hardware and
plumbing supply stores. It is essential that the tools and
materials be on hand before work is begun.
REPLACEMENT USE
When replacing an original unit, be certain to shut-off water
supplies before removing the unit or disconnecting water
supply lines and drain fittings. Original supply lines and
shut-off valves should be replaced and used with fittings
and adapters to match the hookups on the
replacement unit.
USE TEFLON SEALANT TAPE ON PIPE THREADS
FOR WATERTIGHT CONNECTIONS!
ROUGHING-IN DIMENSIONS:
•
For reference
!
Adjustable Wrench
Channel Locks
Regular Screwdriver
Phillips Screwdriver
10'
Saber Saw
Pipe Wrench
Level
Tubing Cutter
Square
Tape Measure
Electric
Drill
1
2
3
4
5
6
7
8
9
10
11 1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Hacksaw
Sealant
