RSS Indicator
Establishing a Connection
Getting Ready
What‘s in the Box?
Use the power switch to turn on your receiver.
Make sure that your devices are set to the
same channel. (see “Choosing a Channel”)
It takes between 10-30 seconds for the
transmitter to connect to the receiver. During
this brief period, the receiver’s video output
displays “Waiting for connection”.
Once the transmitter recognizes a video input,
the video format will be displayed on the
OLED display.
The RSSI (Wireless Received Signal
Strength Indicator) is displayed right next
to the channel information on the OLED
display. Five dots show the signal strength:
Status
Description
0-1
Radio signal strength is weak and
artefacts are visible in the video signal
2-3
Radio signal strength is normal and
video quality is good
4-5
Radio signal strength is very strong and
video quality is very good
www.dwarfconnection.com
1. Power your devices. Find details about
proper powering options in the product
manual provided on our website.
2. Connect the receiver to the monitoring,
recording or distribution device of your
joice.
1x X.LINK-XS3 wireless video receiver
1x NPF battery plate
1x Spacer for NPF battery plate
1x Mounting piece for NPF battery plate
1x Power cable 4-pin to D-Tap
4x M3x6 socket head screws
4x M3x25 flat head screws
Quick sTarT guidE
DC - X.LINK-XS3
