26
3.12 PTZ Setup
CONFIGURATION MENU
HOME FUNCTION SETUP
VIEW ANGLE SETUP
ORIGIN OFFSET
FACTORY DEFAULT
PTZ RESET
OSD DISPLAY
SYSTEM SETUP
FUNCTION RUN
SYSTEM INFORMATION
EXIT(ESC TO EXIT)
3.12.1 HOME FUNCTION SETUP
HOME FUNCTION SETUP
FUNCTION : NONE
NUMBER : ---
WAITING TIME : 120 SEC
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
FUNCTION
NONE, TOUR, PATTERN, AUTO SCAN, PRESET
NUMBER
---
WAITING TIME
10 ~ 240 seconds
ENABLE
ON, OFF
The Home Function can be set so that the camera automatically goes to Tour, Pattern,
Auto Scan, or Preset after the keyboard or DVR has been idle for a specified amount
of time.
For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.
Follow these steps to program the Home position:
1.
Select “FUNCTION” by pressing the Right or Left key to scroll through the None,
Tour, Pattern, Auto Scan, or Preset functions.
2.
Select “NUMBER” and press the Right or Left key. The recorded function number
will scroll.
3.
Select “WAITING TIME” and press the Right or Left key to select from 10 to 240
seconds.
4.
Select “ENABLE” and turn to ON or OFF by pressing the Right or Left key.