Quick Start Guide
Quick Start Guide
1. The mounting surface must withstand five times the weight of your
camera.
2. Pay attention to the cables. The can easily become caught and
damaged. Any damage may cause a short or fire.
3. Detach the camera’s dome cover by loosening the 2 screws on the
dome using the included torque wrench.
4. Use the mounting template to mark and drill the necessary holes in
the mounting surface.
STEP 1 – PREPARING TO MOUNT THE CAMERA
Pass the wires through the mount bracket and make all necessary
connections. Connect the BNC cable and power cables to the
camera.
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Power requirements
Power consumption
12VDC ONLY!
CAUTION! The camera supports
DC power supply only
DC12V(LED off): 1.7W
DC12V(LED on): 2.9W
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
WHAT’S IN THE BOX
Mounting
bolt and nuts
1 set
Mounting
templates
1
Hex Allen
wrench
1
Quick set up
guide
1
Screws
and plastic
anchor-2pcs
1 set
Test video
cable
1
Protective sheet
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Manual
Template Sheet
for installing by Bolt & Nut
Mount Bolt & Nut
Screw &
Plastic Anchor-2pcs
Torx Wrench
Test Video Cable
Attention: This document is intended to serve as a quick reference for initial
set up. It is recommended that the user read the entire instruction manual for
complete and proper installation and usage.
NOTE:
Download all your support materials and tools in one place.
1. Go to:
http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the
‘Search by Product’
search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click
‘Search’
. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
DW® Universal HD over Coax®
ultra low-profile vandal dome cameras
DWC-V7253WTIR
Mounting template
Protective sheet