Sheet 1 of 3
Tools not supplied.
The information shown below details the recommended bolt torque when
mounting Sabre to post top bracket.
Fig. 1
Fig. 4
*Maximum weight of lantern including mounting bracket.
Fig. 1 - Sabre 2 (32 LED)
Fig. 2 Stirrup wall mounting option
Fig. 3 Post top mounting option
Due to continuous product development the details within this document
are subject to change at any time, please contact us for the most up-to-date
information or visit: www.dwwindsor.com
3d50302
-08 - Issue 1
DW Windsor
Pindar Road, Hoddesdon, Hertfordshire, EN11 ODX
T: +44 (0) 1992 474600 | E: [email protected]
dwwindsor.com
The Sabre Range
LED Flood Light
Sabre 1, 2 and 3
Installation Instructions
IMPORTANT
Product Details
Mounting options
Tools Required
Recommended Torque
10mm Allen Key
2
Pozi or Slotted
Screwdriver
3
5mm Allen Key
1
Dimensions (mm)
Max. Weight (kg)*
Windage m²
A
B
C
Sabre 1
283
390
73
3.8
0.016
Sabre 2
386
488
81
7.8
0.029
Sabre 3
460
595
94
13.1
0.045
Power Ranges (Watts)
Standard
CLO Enabled
Sabre 1
12 - 55
10 - 46
Sabre 2 - 24 LED
17 - 79
14 - 67
Sabre 2 - 32 LED
22 - 105
18 - 88
Sabre 3
41 - 198
35 - 151
Post Top Bracket Mounting Torque (Nm)
Sabre 1
10
Sabre 2
10
Sabre 3
10
Entry Options
Fig.
Stirrup wall mount
2
Post top
3
230VAC 50Hz
IP66 IK08
• DISCONNECT ELECTRICAL SUPPLY BEFORE INSTALLATION OR SERVICING.
• THIS PRODUCT MUST BE EARTHED.
• THIS PRODUCT IS DESIGNED TO OPERATE OUTDOORS. IF REQUIRED TO BE
USED INDOORS PLEASE CONSULT DW WINDSOR.
• THIS PRODUCT IS FITTED WITH HIGH IMPACT RESISTANT GLASS AND MAY
BE MOUNTED AT HEIGHTS
ABOVE OR BELOW 5m.
