CB-5222 User and Installation Guide
86
Backup & Restore
The
Backup & Restore
screen enables you to create backup files of the unit’s analytics settings and
to restore them.
Figure 92: Analytics > Backup & Restore Screen
To back up the analytic firmware file
Click
BACKUP
.
To restore the analytic firmware file
Do one of the following:
To restore factory defaults, select
To factory defaults.
To restore all defaults from a stored file, select
Full restore from file,
click
Browse
to
locate the file path
,
then select the file.
To restore analytic settings from a stored file, select
Analytic settings from file,
click
Browse
to locate the file path
,
then select the file.
Click
RESTORE
.
Note:
Analytics firmware is stored in a separate file than the camera system software. To backup and
restore the camera system software version, see
Refer to the
HTML Edition Units User’s Guide
for detailed instructions on configuring these settings.
Log Out
Select the
Log Out
link in the navigation bar to close the session. The following message appears:
Figure 93: Logout Message
To return to the application, click
Login
.
The
Login
window opens. See Figure 11: Login Window.